We believe in quality, so we are working with world leading chemicals company. we are authorized Supplier & Applicator of world best construction chemicals company Berger Fosroc Bangladesh. Fosroc is a global manufacturer of high-performance chemicals and materials for the construction industry. Fosroc’s tailored constructive solutions are developed combining an extensive range of products with expertise and experience to meet the needs of the construction industry. From the cement factory through to final finishes of the construction project, Fosroc is your chosen partner for constructive solutions. Now we are Supplier & Applicator of Fosroc Bangladesh. As a Fosroc Bangladesh supplier we supply conplast WL (Integral waterproofing admixture), Conplast SP337 (Water Reducing & Retarding Admixture), Conplast SP430 G8, Conplast P221, Conbextra GP2, Auramix 300 (Advanced low viscosity high performance Superplasticiser), Concure WB, Rebool Emulsion Xtra (Sutter Release Agent Concentrated and emulsified chemical mould release Agent), Reebaklens, Brushbond RFX, Renderoc RG, Gebex 100, Nitonond AR, Nitobond EP, Lokfix, Thioflex 600, Nitozinc primer, Nitocote EN522, Renderoc plug and many other Fosroc products.
Fosroc Bangladesh Supply Product List
Concrete Admixtures | |||
Product | Description | Typical Uses | Dosage |
Conplast SP337 20& 200 Ltr | High Performance water reducing super plasticiser. Confirms to IS:7103-1999. Also complies with IS:2645-2003. BS 5075 part 3 and ASTM C-494 Type F. | Provides high quality concrete with accelerated early strength. | 300-570 ml/bag of cement |
Conplast SP 430G8 250 Kg | High range super plasticising admixture complies with IS:9103: 1999 & BS 5075 Part3. It also confirms to ASTM C-494 Type F & Type G | Provides high water reducing, Retarding & high ultimate strength. | 450 ml-1 Ltr bag of cement |
ConplastX421C/WL 5,10,20 & 200 Ltr | Integral waterproofing admixture for concrete & mortar. Confirms to IS:2645-2003 & IS:9103-1999 | Provides increase the waterproofing properties concrete & cement sand mortars | 200 ml/bag of cement |
Conplast CN 20 Ltr | Calcium nitrate based corrosion inhibiting admixture. | Provides as a corrosion inhibiting admixture for use in concrete where Calcium Nitrite is required | Approximately 2-6% by weight of cement |
Conplast NC 20 Ltr | Chloride free accelerating admixture. Complies with IS:9103-99, BS 5075 part 1 & ASTM C494 Type C. | Provides accelerates the setting time of concrete & helps in early strength gain of cement in concrete & mortar mixes.. | 1-1.5 Ltrs/bag of cement |
Auramix 300 200 kg | Advanced low viscosity retarding Superplasticiser, based on polycarboxylic technology. | Auramix 300 is a high performance retarding superplasticiser intended for applications where retardation & long workability retention are required, eg-Mass raft foundation, pumped concrete, high performance concrete, concrete requiring long workability retention | Approximate dosage: 0.3-0.5 Ltr Bag of cement |
Surface Treatment Elements |
|||
|
Product |
Description |
Typical Uses |
Coverage |
|
Concure WB 20 & 200 Ltr |
Water based concrete curing compound. |
Exposed concrete structures, walls, canel, linings, mass concrete faces. |
200-270 ml/m2 |
|
Reebaklens 20 Ltr |
Concrete remover, cleaning and eatching agent |
Removes hardened concrete from tools, machinery and equipment. Suitable for eatching. |
10-15 m2/ Ltr |
|
Reebol Emulsion Xtra (20 Ltr) |
Concentrated and cmulsifield chemical mould/shutter release agent |
1 Ltr of Reebol Emulsion Xtra when diluted with 6 ltrs of water will comer 80-180 m2 depending upon the nature of the substrate. |
|
Grouts & Anchors |
|||
|
Product |
Description |
Typical Uses |
Coverage |
|
Conbextra GP2 22 kg bag |
Free flow, high strength, non-shrink, cementitious precision grout. |
Machine base plate grouting-turbines generator, pumps, presses, steel rolling beds production machinery and crane rails, construction grouting stanchions, colums, beam, bolt pockets, keyways & anchors. |
13.3 Ltr/25 kg at flowable consistency 12.5 Ltr/25 kg at pourable consistency |
|
Cebex 100 225 gm |
Plasticised expanding grout admixture |
Grouting of voids-tunels & Shaft linings, non reinforced duct grouting, below foundation and confined cavity fill. |
225 gm/bag of cement |
|
Conbextra EP10 1& 4.5 Ltr |
High strength, epoxy resin grout |
for injectioning into cracks, Honeycombs and cavities in concrete structures. |
Refer to Datasheet |
|
Lokfix 0.5 & 2.5 Ltr |
Range of polyester resin based chemical anchors |
High early strenght, epoxy resin grout for chemical anchoring. |
Refer to Datasheet |
|
Renderoc RG 25 Kg bag |
General purpose, non shrink high strength cementations micro concrete. |
Suitable for varius structural strengthening. |
13 Ltr/25 kg@W/P 0.16 |
Industrial Flooring |
|||
|
Product |
Description |
Typical Uses |
Coverage |
|
Nitoflor Hardtop 25 Kg |
Non metallic, monolithic surface hardening compound |
Ideally suited for all industrial areas subject ot the heaviest traffic loading ays, truking lanes, workships machne shop platforms etc. |
Aplication: kg/m, Heavy duty: 7.0 Meadium Duty: 5.0 Light Duty: 3.0 |
|
Nitoflor SL 2000 1.5 Ltr |
0.4-0.5 Mm thick self smoothing geamless epoxy floor toppings |
ideal for industrial floor where a hardwearing hygenic, dust free environment is importat, usually for hospital clean room, electronic assembly plants etc. |
7.5 m2/pack@ 2 mm thickness |
|
Nitoflor FC 150 4.5 Ltr |
High build epoxy resin floor coating |
Provides a highbuild, Hardwearing, chemical & abration resistant floor finish. It can be used as slip resistant coating in wet areas |
Base coat: 18 m2./pack@250 microns DFT Top caot:8m2/pack |
Concrete Repairs |
|||
|
Product |
Description |
Typical Uses |
Coverage |
|
Nitofill EPLV 1 Litre Pack |
Two part Low viscosity epoxy injection resin system |
Nitofill EPLV is solvent- free, low viscosity epoxy resin system is mixed in the proprotions supplied to form a strong permanent bond and seal in cracks in concrete and masonry. Nitofill EPLV is designed to be injected into cracks using suitable resin injection equipment. |
Refer to Datasheet |
|
Nitommortar 30 10 Ltr |
High build epoxy based repair mortar. |
For lining ETP, STP and chemicals tanks along with suitable protective coating and for repairing damp (pointing) spill ways etd. Where abration resistance is required along with high strength. |
Refer to Datasheet |
|
Renderoc HB2 Powder 18 kg Liquid 0.54 kg |
Light weight structural grade prepacked cement mortar |
Reinstatement of spalled concrete r.c members like beam, slab, soffits etc. |
Refer to Datasheet |
|
Renderoc HSXtra |
Shrinkage controlled, polyemer modified, cementitious, high specification repair mortar system. |
For emergency reinstatement of damaged or deteriorated concrete. For both internal and external use. |
Refer to datasheet |
|
Renderoc Plug5,15 kg Bag |
Rapid setting cement based waterleak plugging mortar. |
For the rapid temporary patching And plugging of concrete segmens, sewage systems, below ground access chambers, popes, basements, foundations mines. |
Refer to Datasheet |
Protective coating |
|||
|
Product |
Description |
Typical Uses |
Coverage |
|
Dekguard S/Dekguard std 5&20 Ltr |
High performance pure aliphatic acrylate based protective & decirative coating for concrete & Masonary |
Recommended as a protective & decorative coating for atmospherically exposed RC Structures from long term protectin viewpoint. It is ideally suited for soffit of bridge decks, RC frames in high rise buildings and similar expensive infrastructures. Can be used both in repaired and new construction situations. |
Dekguard primer-2.5m2/Ltr. Dekguard S Topoat-3m2/ ltr, Dekguyard std priver-8m2/Ltr. Dekguard std Topcoat-8m2/ Ltr/Coat. |
|
Nitocote EN901 4 Ltr Pack |
High chemical resistant protective lining |
Suitable in waster water treatment plants, desalination plants, food processing plants, pulp & paper mills, power plants, chemical manufacturing plants, ferrtiliser plants, petrolium refineries etc. |
2.02/litre/coat@500 microns DFT |
|
Nitozine primer |
Two component epoxy xincrich primer |
Nitozine primer is recommended for priming exposed steel reinforcement for use with fosroc concrete repair location. |
4-5m2/Litre |
|
Nitocote AP35 1 Ltr |
Latex Acrylic polymer based cementitous coating |
Nitocote AP 35, A single component latex acyrlic polymer based emulsion is used for protecting steel reinforcement from corrosion. It only needs to be mixed with cement at site to produce an easily brush able coating. |
Acrylic polymr: 1.25 Part cement, Approximately- 8-10m2/Litre depending on substrate. |
|
Nitocote SN522 5&20 Ltr |
Ready to use colourless silicone water repellent |
To provide a water repellent surface with imporved self cleaning properties on exteriors of buildings, brick work, concrete, cement rendering, natural & cast stone. |
4.5-9m2/Ltre |
|
Nitocote ET402 10 Ltr pack |
Two part coal tar extended epoxy resign coating |
Provides chemical & abrasion resistance to prevent corrosion of concrete surfaces. |
5,0m2/Litre@200 microns WFT (Per Coat) |
|
Nitocote EP405 4 Ltr Pack |
Solvent free, food grade epoxy resign coating for potable water retaining structures Approved by CFTRI |
Provide protection to concrete & metal structures against corrosion from aggresive agents in drinking water and food stuff. Suitable for protable water tanks, interior coating for large dia pipeline conveying potable water structures in food and beverage industries. |
10m2/Ltr/Coat @ 100 microns |
Joint Sealants |
|||
|
Product |
Description |
Typical Uses |
Coverage |
|
Decofill 1kg |
Flexible acrylic sealant for interior gaps & cracks, |
Internal & external plastercracks in walls, ceiling etc |
Refer to datasheet |
|
Nitoseal 280 1.5 & 4 Ltr |
Heavy duty epoxy urethane Joint sealant. |
For sealing interal floor joints subject to heavy industrial use in factories, warehouses etc. Particularly suitable for sawcut joints in long strip flooring & other non-moving joints. |
Internal width (mm) x sealant dept (mm) x Joint length (m) 100 |
|
Thioflex 600 2.5 Ltr |
Two part polysulphide scalant |
Provides excellent adhesion to common building substrates. It is particularly recommended for scaling structural expansion joint in most civil engineering structures like building superstructure, subways, basements, floors and reservoirs. |
Refer to Datasheet |
Waterproofing System | |||
Product | Description | Typical Uses | Coverage |
Brushbond RFX Part A-15kg, 5kg Part B-4.8 Ltr, 1.63 Ltr | High performance Elastomeric polymer modified cementitous waterproof coating. | Used for waterproofing of existing & new structure. Also suitable for all types of structures including those situated in coastal environment-Roof, basements, waterlanks etc. | 12-14m2 in two coats to achieve 1 mm thickness |
Brushbond TGP 15 Kg bage | Crystalline capillary waterproofing system for cementitous waterproof coating | For waterproofing against the positive or negative sides of hydrostatic heads of water, for dampproofing, reparing cracks, plugging holes, sealing wall-floor joints & stopping active leaks. | 1.0 to 2.0 kg/m2 per application (brush) |
Hydroproof xtra 20 & 50 Ltr | Single component polymer for cement based waterproofing. | Provides an effective & economical method of waterproofing to concrete and masonary surfaces, by mixing with cement and application by brush | 2m2/Ltr/Coat |
Nitoproof 600 20 Litres Drums | Liquid applied single componenet clastomeric waterproofing membrance | For a wide rnage of water/vapour proofing applications such asfoundations, basementstunnels ground floors, suspended floors car decks, roofterraces, balconies patios, brides, precints, inspection pits, water retaining structures (not protable water), sewage works & inverted roofs. | 0.76m2/ Litre@1.3 mm |
Adhesives / Bonding Agent |
|||
|
Product |
Description |
Typical Uses |
Coverage |
|
Nitobond AR 1,5 & 20 Ltr |
Acrylic Emulsion cement modifier & concrete bonding agent. |
Recommended primer for the fosroc cementitous repairs system for improving bonding in renders & mortars, repair of worn, damaged or spelled concreted. |
6-8m2/litre |
|
Nitobond SBR 1,5 & 20 Ltr |
Styrene butadiene polymer bonding agent cum cement mortar/concrete modifier |
Used to modify the concrete for repairing distressed RC memebers and to modify mortars as waterproofing and flooring render |
6-7m2/Ltre |
|
Nitobond EP 1&4 Ltr |
Solvent free epoxy bonding agent for joining old and new concrete |
For bonding new cementitous materials to existing cementitious surfaces, For use on horizental surfaces on vertical surfaces where the mortar or concrete can be supported by formwork. Idel for existions and repairs to structural concrete in industrial residential & commercial buildings. |
2.5m2/Litter@400 microns thickness |
|
Nitobond PC 6.15, 30 kg |
Thixotropic epoxy adhesive for precast segments. |
Bonding precast concrete semgets to speed up construction and provide structural & water resistant joint. Eg. flyovers, Brides, Pipelines Etc |
1 Litre/m2@1 mm thickness |
|
Nitowrap 410 15 kg |
Nitowrao 410 is a gigh build epoxy saturat. |
The mixed material of Nitowrap 410 saturant is applied over the tack free primer |
3.5-4.0 m2 per coat per ltr. |
Composite Fiber System |
|||
|
Product |
Description |
Typical Uses |
Coverage |
|
Nitowrap Ep (GF) Nitowrap EP (CF) |
High performance high strength, composite fibre system for structural strengthening. |
Used for strengthening columns, beams, slabs of load bearing structures particularly where improvement to shear strength & deformation characteristics is required. It is ideal for seismic retrofitting also. Typical applications include piers, columns, beams, slabs, retaining walls, masonary bridges, towers, pipes, chimneys, tunnels & othe structure etc. |
Follow Data Sheet |
|
Nitowrap CFP (25/50/100) 100m Length/roll |
High performance high strength, corrosion resistantpultruded carbon fiber plates |
For increasing load carrying capacity of structural members particularly where increase in live load/traffic loads expected. |
Follow Data Sheet |
Others Product & Services
